Il Grigliato  è un prodotto di fabbricazione industriale che trova impiego in campo CIVILE ed INDUSTRIALE , per passerelle, recinzioni, bocche di areazione, cancelli, balconate, tamponamenti.

Il GRIGLIATO si divide in due famiglie, l’ELETTROSALDATO E/O PRESSATO Una “Struttura reticolare costituita da barre portanti collegate ortogonalmente a barre trasversali. I punti di collegamento tra i due tipi di barre sono definiti ‘nodi’”.

GRIGLIATO ELETTROSALDATO “L’unione delle barre portanti alle barre trasversali avviene mediante l’azione combinata di elettrosaldatura – senza apporto di materiale – e di pressione, concentrata su tutti i nodi. Questo procedimento determina la compenetrazione delle barre trasversali nelle barre portanti”.

GRIGLIATO PRESSATO “L’unione delle barre portanti alle barre trasversali avviene per mezzo di una pressione esercitata sulle barre trasversali per ottenere l’incastro nelle cave predisposte sulle barre portanti. In alcuni casi le cave vengono predisposte anche sulle barre trasversali”.

• DENTELLATO Il grigliato dentellato è un grigliato ottenuto utilizzando come componenti barre portanti e/o barre trasversali in laminato o in cesoiato che sono superficialmente dotati di denti opportunamente sagomati con funzione antisdrucciolevole. Grigliato per destinazione d’uso civile.

Chiaramente, essendo un prodotto che trova utilizzo nell’ambito civile e industriale dovrà rispettare alcuni standard di sicurezza regolate dalle normative vigenti. A tale scopo l’associazione italiana dei fabbricatori di grigliati, Assogrigliati, attraverso la sua Guida intende fornire agli utenti finali tutte le informazioni necessarie per una corretta istallazione del prodotto. Le valutazioni tecniche dei dati riportati nella Guida sono stati elaborati da Assogrigliati sulla base delle prove effettuate presso il Politecnico di Milano.

Proponiamo ai nostri clienti tutta la gamma dei grigliati, pedonali, carrabili e per recinzione, inoltre abbiamo la possibilità di poterli fornire in formati commerciali o su misura, con i relativi accessori.

ELECTROWELDED AND / OR PRESSED GRID

Grilled is an industrial product that is used in the CIVIL and INDUSTRIAL fields, for walkways, fences, ventilation openings, gates, balconies, curtain walls.

The GRID is divided into two families, the ELECTROWELDED AND / OR PRESSED A “Reticular structure made up of supporting bars orthogonally connected to transverse bars. The connection points between the two types of bars are called ‘nodes’ “.

ELECTROWELDED GRID “The joining of the supporting bars to the transverse bars takes place through the combined action of electro-welding – without the addition of material – and pressure, concentrated on all the nodes. This procedure determines the interpenetration of the cross bars in the bearing bars “.

PRESSED GRID “The joining of the bearing bars to the cross bars takes place by means of a pressure exerted on the cross bars to obtain the interlocking in the slots provided on the bearing bars. In some cases the slots are also arranged on the transverse bars “.

TOOTHED The notched grating is a grating obtained by using load-bearing bars and / or transverse bars in laminate or in shears that are superficially equipped with suitably shaped teeth with non-slip function. Grilled for civil use.

Clearly, being a product that is used in the civil and industrial sector, it must comply with certain safety standards governed by current regulations. To this end, the Italian association of manufacturers of gratings, Assogrigliati, through its Guide, intends to provide end users with all the information necessary for the correct installation of the product. The technical evaluations of the data reported in the Guide were elaborated by Assogrigliati on the basis of the tests carried out at the Politecnico di Milano.

We offer our customers the whole range of gratings, pedestrian, driveways and for fencing, also we have the possibility of being able to supply them in commercial or customized sizes, with the relative accessories.