I “TRAFILATI” sono gli acciai al carbonio maggiormente impiegati nel settore meccanico grazie all’ottimo compromesso che questi acciai offrono fra tra la resistenza e la tenacità.

Di seguito elenchiamo la gamma disponibile in tondi, piatti, quadri ed esagoni con le diverse qualità in relazione alle norme d’impiego: EN 10277-2 Acciai per impieghi generali, EN 10277-3 Acciai per lavorazioni meccaniche ad alta velocità, EN 10277-4 Acciai da cementazione, EN 10277-5 Acciai da bonifica, EN 10088-3 Acciai inossidabili per impieghi generali.

TRAFILATI TONDI, pelati o bonificati dal Ø 3÷80 mm Pelato Ø 20÷160 mm nelle seguenti qualità; S235JRC, S355J2C, E335GC+S, C15, C35, C40, C45, C45S acc. to EN 10277-2 080A15 acc. to BS 970 C10R, C15R acc. to EN 10277-4 C15E, C35E, C35R, C40E, C40R, C45E, C45R, CK45 acc. to EN 10277-5. Dal Ø 10÷80 mm Pelato Ø 85÷100 mm qualità 16MnCrS5 acc. to EN 10277-4. Pelato Ø 20÷100 mm qualità 42CrMoS4V acc. to EN 10277-5.

TRAFILATI TONDI RETTIFICATI C45 acc. to EN 10277-2, 42CrMoS4 bonificato sec. EN 10277-5.

TRAFILATI PIATTI e QUADRI S235JRC+c, C45 e S355J2 sec. EN 10277-2.

TRAFILATI ESAGONALI S235JRC, C45 sec. EN 10277–2

TRAFILATI TONDI AL PIOMBO E ZOLFO 11SMn30, 11SMn37, 11SMnPb30, 11SMnPb37, 36SMnPb14, 11SMnPb37TeBi, 45S20 acc. to EN 10277-3.

TRAFILATI QUADRI AL PIOMBO E ZOLFO 11SMn30, 11SMn37, 11SMnPb30, 11SMnPb37, 36SMnPb14 acc. to EN 10277-3.

TRAFILATI ESAGONALI ALLO ZOLFO 11SMn30 sec. EN 10277-3.

TRAFILATI ESAGONALI AL PIOMBO 11SMnPb30, 11SMnPb37, 36SMnPb14 acc. to EN 10277-3

TRAFILATI TONDI in acciaio inossidabile EN 10088-3, ASTM A 276/ A 479 / A 582

TONDI LAMINATI A CALDO in acciaio inossidabile EN 10088-3, tol. K13

TRAFILATI ESAGONALI in acciaio inossidabile acc. to EN 10088-3

DRAWN

“DRAWN” are the carbon steels most used in the mechanical sector thanks to the excellent compromise that these steels offer between resistance and toughness.

Below we list the range available in rounds, plates, squares and hexagons with different qualities in relation to the standards of use: EN 10277-2 Steels for general use, EN 10277-3 Steels for high speed mechanical machining, EN 10277- 4 Case hardening steels, EN 10277-5 Tempering steels, EN 10088-3 Stainless steels for general uses.

ROUND DRAWN, peeled or tempered from Ø 3 ÷ 80 mm Peeled Ø 20 ÷ 160 mm in the following qualities; S235JRC, S355J2C, E335GC + S, C15, C35, C40, C45, C45S acc. to EN 10277-2 080A15 acc. to BS 970 C10R, C15R acc. to EN 10277-4 C15E, C35E, C35R, C40E, C40R, C45E, C45R, CK45 acc. to EN 10277-5. From Ø 10 ÷ 80 mm Peeled Ø 85 ÷ 100 mm quality 16MnCrS5 acc. to EN 10277-4. Peeled Ø 20 ÷ 100 mm quality 42CrMoS4V acc. to EN 10277-5.

DRAWN ROUND RECTIFIED C45 acc. to EN 10277-2, 42CrMoS4 tempered according to EN 10277-5.

DRAWN PLATES and SQUARES S235JRC + c, C45 and S355J2 sec. EN 10277-2.

HEXAGONAL DRAWN S235JRC, C45 sec. EN 10277–2

ROUND DRAWN LEAD AND SULFUR 11SMn30, 11SMn37, 11SMnPb30, 11SMnPb37, 36SMnPb14, 11SMnPb37TeBi, 45S20 acc. to EN 10277-3.

DRAWN SQUARE WITH LEAD AND SULFUR 11SMn30, 11SMn37, 11SMnPb30, 11SMnPb37, 36SMnPb14 acc. to EN 10277-3.

HEXAGONAL DRAWN WITH SULFUR 11 SMN30 sec. EN 10277-3.

LEAD HEXAGONAL DRAWN 11SMnPb30, 11SMnPb37, 36SMnPb14 acc. to EN 10277-3

ROUND DRAWN in stainless steel EN 10088-3, ASTM A 276 / A 479 / A 582

HOT ROLLED ROUND in stainless steel EN 10088-3, tol. K13

HEXAGONAL DRAWN IN stainless steel acc. to EN 10088-3